from 28,35 EUR
TOP

Made-to-measure clothes rail with wall flange

Item no.:GAR332621
Status:Made to order
Delivery time:3 to 5 working days
Shape:Straight
Diameter:
▾
min 150 mm
max 2390 mm
In meinem Raum ansehen
Screws:
▾
Ø wall plug:
▾
Calculating price
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Made to measure to order
  • Fast shipping

How to determine the order size

Inside dimension equals order size: tape measure showing the clear width of a cupboard compartment

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.

Description

Clothes rail with wall flange, made to measure

Our best-selling clothes rail: a stainless steel tube that fits between two walls and is screwed to a wall flange at each end. For niches, built-in wardrobes, hallways, dressing rooms and children's rooms. We make every rail to your measurements in our workshop in Germany.

The wall flange

Each stainless steel flange has three holes and is fixed to the wall with three screws. The screws remain visible and give the rail its classic, crafted character. Because both ends are firmly supported, a rail between two walls is the most stable form of clothes rail. If you prefer not to see any screws, choose the clothes rail with concealed fixing.

Which tube diameter?

You can choose between 21.3, 26.9 and 33.7 mm. For standard clothes hangers we recommend 33.7 mm: the hanger hook, with an opening of around 35 mm, sits steadily on it and does not tip. The thicker tube is also the stiffest; under the same load, a 26.9 mm tube deflects about twice as much and a 21.3 mm tube about four times as much. The slimmer tubes suit short niches, light clothing, children's hangers or use as a towel rail.

Material and finish

V2A stainless steel, material 1.4301 (AISI 304), ground with grit 240. The brushed, satin-matt grain shows hardly any fingerprints and is forgiving of signs of use. The chromium in the steel forms a protective layer that renews itself after scratches; in living spaces, V2A is permanently corrosion-resistant.

How to measure correctly

The ordering dimension is the overall length: the distance from wall to wall at the height where the rail is to sit, including the flanges. Measure at the front and at the back, as niches are rarely exactly parallel, and enter the smaller dimension. Tiles, skirting boards or plaster edges must be included in the measurement. We cut the tube so that tube and flanges together match your dimension exactly.

Example: your niche measures 80.3 cm. Then you order 80.3 cm.

Guide values for planning

  • Centre of the rail about 28 to 30 cm in front of the back wall, so that jackets and coats hang freely
  • for long garments, the rail at about 170 to 180 cm above the floor; for shirts and jackets, a hanging height of around 100 cm is sufficient
  • at least 5 cm of clearance between the rail and the shelf or ceiling, so that the hangers can be lifted off

Installation and substrate

In concrete and solid brick, expansion anchors hold very well. In perforated brick and aerated concrete, long wall plugs or injection anchors grip better; in plasterboard, screw into the studs of the substructure or use metal cavity fixings. Drill the hole deeper than the plug length by the plug diameter. You can select stainless steel screws and plugs directly above.

Accessories

Polished S-hooks to match the tube diameter can be selected above; they are slid onto the rail before installation. For long spans with heavy coats we recommend 33.7 mm. For damp rooms, there is the straight rail in V4A, 25 mm.

Care

A damp cloth is sufficient, with a little washing-up liquid if needed; always wipe in the direction of the grain. Do not use chlorine-based cleaners, abrasive cleaners or steel wool. Blend fine scratches in with an abrasive fleece in the direction of the grain. More in our care instructions.

Unsure about measuring? Send us a photo of the niche with your measurements, and we will be glad to help.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
E-mail: info@steel-deal.de

Frequently asked questions

Wie messe ich das richtige Bestellmaß für meine Garderobenstange?

Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.

Welchen Durchmesser sollte ich für meine Garderobenstange wählen?

Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.